Chimney Repairs In Dudley
Re-Pointing, Flashing Repairs, Cowls & Stack Removal
Chimney Repair Specialists Covering Dudley, Birmingham And The Black Country
Chimney stacks take more punishment than almost any other part of a building - exposed on all sides to wind, rain and frost, with mortar joints that slowly erode over time. Dudley's elevated position means the stacks here are particularly exposed, and failing chimney flashings or deteriorating brickwork are among the most common causes of roof leaks we get called out to. Whether it's a re-point, a new flashing, a cowl fitting, or a full stack removal, we carry out the work properly from the ground up.
Get A Free Quote
Fill in your details and we'll get back to you with a free, no-obligation quote.
What Chimney Repairs Do We Carry Out?
Re-Pointing
Raking out and replacing deteriorated mortar joints on chimney stacks to stop water penetrating the brickwork and causing damp inside the property.
Flashing Replacement
Replacing lead flashings and back gutters around the base of the stack where they have cracked, lifted or simply reached the end of their life.
Cowl & Cap Fitting
Fitting chimney cowls on active flues to keep rain and birds out, or capping unused flues to prevent water ingress and maintain ventilation.
Chimney Pot Replacement
Replacing cracked or damaged chimney pots and re-haunching with new mortar to secure them safely on top of the stack.
Stack Removal
Taking down disused chimney stacks to below roof level and making good with matching tiles or slates and lead flashing over the opening.
Partial Rebuilds
Rebuilding the upper section of a stack where the brickwork has deteriorated beyond repair, matching the existing brick where possible.
Chimney-related issues account for a significant proportion of the roof leak investigations we carry out across Dudley - often a flashing or re-pointing job rather than anything more serious.
Based on enquiries handled by JSD Roofing & Building Ltd across Dudley.
How We Handle Chimney Repairs
Inspection
We assess the chimney from roof level to identify what's causing the problem and what work is needed.
Clear Quote
You'll receive a written quote covering all aspects of the job before any work is agreed.
Work Carried Out
We carry out the repair properly, using the right materials and techniques for the job.
Checked & Cleaned Up
We check the repair is sound and leave the area tidy before we go.
Don't Leave Chimney Problems Too Long
A chimney that's starting to deteriorate can look fine from the ground but be letting water in at the top. Left untreated, water getting into the stack eventually causes damp on chimney breast walls inside, damage to the roof timbers nearby, and in worse cases structural movement as the mortar continues to break down. Most chimney problems caught reasonably early are straightforward to fix - the longer they're left, the more involved the job tends to become.
Find out about our lead work →How Much Do Chimney Repairs Cost?
A straightforward re-point or flashing replacement typically starts from a few hundred pounds. Stack removal or partial rebuilds will cost more depending on the height and amount of work involved. All quotes are free and based on a site visit so you'll know the exact cost upfront.
See Our Roofing Cost GuideChimney Repair FAQs
How do I know if my chimney needs repairing?
Common signs include damp patches on the chimney breast inside the house, mortar or brickwork falling from the stack, visible cracks in the brickwork from the ground, or a flashing that has lifted away from the stack. If you've noticed any of these, it's worth getting it looked at - chimneys that are left to deteriorate can become a safety issue as well as a source of damp.
What is chimney re-pointing?
Re-pointing is the process of raking out the old, deteriorated mortar joints between the bricks and replacing them with fresh mortar. Over time the mortar weathers and cracks, allowing water to get into the brickwork. On an exposed chimney stack this can happen faster than elsewhere on the building, particularly in areas like Dudley where the higher ground means the stacks catch more wind and rain.
Do you remove chimney stacks completely?
Yes. If a chimney stack is disused and causing problems - leaking, unstable, or simply no longer wanted - we can take it down to below roof level and cap it off neatly with matching materials. This is a popular option on older terraced properties where the original fireplaces have long been removed.
Can you fit a chimney cowl or cap?
Yes. Cowls help keep rain, birds and debris out of flues that are still in use, while unused flues can be capped at the top or fitted with a half-round ventilation cap to keep the flue dry without blocking airflow entirely. We can advise on the right option for your chimney.
Get A Free Chimney Repair Quote In Dudley
Call JSD Roofing & Building Ltd today or send us a message and we'll arrange a free, no-obligation site visit to assess your chimney.